VRF and VRV systems in Canning Town
Cooling and heating for offices, shops and hospitality venues in Canning Town, with a free site survey and a fixed written quote.
- Free site survey and fixed written quote
- Unit sizes, refrigerant and price set out in writing
- Work planned around your opening hours
How much does a VRF system cost in Canning Town?
In Canning Town, guide prices run from about £3,150 to £6,350 per indoor unit (whole system), plus VAT. A typical job (office floor of 10–16 indoor units) usually comes to £31,500–£101,995 plus VAT. Your exact price is fixed in writing once we have surveyed.
VRF (variable refrigerant flow) — called VRV by some manufacturers — is a commercial air conditioning system where one outdoor unit, or a bank of them, serves many indoor units through a shared refrigerant network.
Our coverage in Canning Town
Canning Town sits within London's dense commercial fabric: shopfronts, offices above, studios and venues, where outdoor unit positions and access need careful planning.
Postcode districts we cover in Canning Town include E16. We also cover Stratford, Bow and Canary Wharf, all within easy reach of Canning Town. Buildings across London range from converted period offices to modern units with deep ceiling voids, so we measure each site rather than relying on a standard package.
What we do
- Heat load and diversity calculations for every zone
- Refrigerant pipework sizing, branch selectors and refrigerant charge calculation
- Leak detection where the refrigerant concentration limits require it
- Central controls, scheduling and BMS integration
- Phased installation, pressure testing, commissioning and full F-gas records
Local guide prices for Canning Town
Prices below include our regional adjustment for London (28% above the UK guide).
| Item | Guide price (ex VAT) | Inc VAT | Basis |
|---|---|---|---|
| Heat pump VRF, per indoor unit | £3,150–£5,695 | £3,780–£6,834 | per unit |
| Heat recovery VRF, per indoor unit | £3,795–£6,350 | £4,554–£7,620 | per unit |
| Central controller and BMS interface | £1,195–£5,050 | £1,434–£6,060 | per system |
| Refrigerant leak detection (per alarmed room) | £505–£1,150 | £606–£1,380 | per room |
| Crane lift for roof plant | £1,195–£3,795 | £1,434–£4,554 | per lift |
Ex VAT, installed system prices including outdoor plant shared across indoor units.
From enquiry to handover in Canning Town
Survey and loads
We calculate loads zone by zone and check roof or plant space, risers and ceiling voids.
System design
Outdoor units, indoor units, branch boxes and pipe sizes are designed together, including the refrigerant charge and any leak detection.
Phased first fix
Pipework and controls cabling go in floor by floor, often out of hours in occupied buildings. We keep work areas in Canning Town screened and tidy at the end of each day.
Pressure test and charge
The network is pressure tested, evacuated and charged with the calculated refrigerant quantity.
Commissioning
Each indoor unit is commissioned and the controls set up, with as-fitted drawings and F-gas records handed over.
Points to plan for in Canning Town
Leak checks
Larger VRF systems usually exceed 5 tonnes CO2 equivalent, so they need at least annual F-gas leak checks — more often at 50 tonnes and above.
Shared buildings
In multi-let buildings, roof space, risers and plant areas are often controlled by a managing agent. We work to their permits and method-statement requirements.
Refrigerant in occupied rooms
Because one network carries a large refrigerant charge, small rooms on the system are checked against the safety limits in BS EN 378 and may need leak detection.
Working hours
Most Canning Town businesses prefer noisy work outside trading hours. Early starts, evenings and weekends can be arranged and are priced up front.
Who we work with in Canning Town
- Hotels and hospitality: quiet bedroom units, public-area cooling and heat recovery for hotels.
- Offices: zoned cooling and heating for open-plan floors, meeting rooms and comms rooms.
Two rules matter for most businesses in England: GB F-gas rules (leak checks from 5 tonnes CO2e) and the periodic energy inspection for more than 12 kW of air conditioning.
FAQs for Canning Town
How much does a VRF system cost in Canning Town?
Guide prices in Canning Town run from about £3,150 to £6,350 per indoor unit (whole system), plus VAT. A typical job (office floor of 10–16 indoor units) costs £31,500–£101,995 plus VAT. We fix the price in writing after a free survey.
Do you also cover Stratford, Bow and Canary Wharf?
Yes. Alongside Canning Town, we also cover Stratford, Bow and Canary Wharf. Each has its own page with local guide prices.
Which postcodes do you cover in Canning Town?
All of them, including E16. Give us your postcode when you enquire and we will confirm the visit details.
Can VRF connect to our BMS?
Yes, through the manufacturer's interface. We specify the right gateway at design stage.
How long does a VRF system last?
With regular servicing, commercial VRF equipment commonly runs for 15 years or more. Lifespan depends on use, maintenance and the operating environment.
Talk to us about your premises in Canning Town
Free survey and fixed written quote. We reply with a guide price or to book the survey.