VRF and VRV systems in Catford
From a single room to a whole floor: VRF and VRV air conditioning in Catford, planned around your trading hours.
- Free site survey and fixed written quote
- Unit sizes, refrigerant and price set out in writing
- Work planned around your opening hours
How much does a VRF system cost in Catford?
In Catford, guide prices run from about £3,150 to £6,350 per indoor unit (whole system), plus VAT. A typical job (office floor of 10–16 indoor units) usually comes to £31,500–£101,995 plus VAT. The fixed price follows a free survey.
VRF (variable refrigerant flow) — called VRV by some manufacturers — is a commercial air conditioning system where one outdoor unit, or a bank of them, serves many indoor units through a shared refrigerant network.
Where we work around Catford
Premises in Catford are often in mixed-use buildings with shared roofs and tight access, so outdoor unit positions are agreed early.
That includes premises in SE6 and the surrounding districts. Neighbouring towns we cover include Blackheath, Greenwich and Beckenham. Buildings across London range from converted period offices to modern units with deep ceiling voids, so we measure each site rather than relying on a standard package.
What is included
- Heat load and diversity calculations for every zone
- Two-pipe (heat pump) or three-pipe / two-pipe heat recovery system design
- Refrigerant pipework sizing, branch selectors and refrigerant charge calculation
- Leak detection where the refrigerant concentration limits require it
- Central controls, scheduling and BMS integration
VRF / VRV prices in Catford
Guide prices for Catford, set for London. Your fixed price comes in writing.
| Item | Guide price (ex VAT) | Inc VAT | Basis |
|---|---|---|---|
| Heat pump VRF, per indoor unit | £3,150–£5,695 | £3,780–£6,834 | per unit |
| Heat recovery VRF, per indoor unit | £3,795–£6,350 | £4,554–£7,620 | per unit |
| Central controller and BMS interface | £1,195–£5,050 | £1,434–£6,060 | per system |
| Refrigerant leak detection (per alarmed room) | £505–£1,150 | £606–£1,380 | per room |
| Crane lift for roof plant | £1,195–£3,795 | £1,434–£4,554 | per lift |
Ex VAT, installed system prices including outdoor plant shared across indoor units.
The steps for a project in Catford
Survey and loads
We calculate loads zone by zone and check roof or plant space, risers and ceiling voids.
System design
Outdoor units, indoor units, branch boxes and pipe sizes are designed together, including the refrigerant charge and any leak detection.
Phased first fix
Pipework and controls cabling go in floor by floor, often out of hours in occupied buildings. We keep work areas in Catford screened and tidy at the end of each day.
Pressure test and charge
The network is pressure tested, evacuated and charged with the calculated refrigerant quantity.
Commissioning
Each indoor unit is commissioned and the controls set up, with as-fitted drawings and F-gas records handed over.
Things to check in Catford
Phasing
In occupied buildings we plan the work floor by floor so the business keeps running.
Roof and height work
Flat roofs, high walls and atriums need the right access equipment and edge protection. We plan towers, MEWPs or scaffold before the job, not on the day.
Plant space
Outdoor units need clear air flow, structural support and safe access for servicing.
Leased premises
If your Catford premises are leased, the landlord's written consent is usually needed for external units, wall penetrations and roof access. We provide drawings and data sheets for the request.
Premises we work in around Catford
- Offices: zoned cooling and heating for open-plan floors, meeting rooms and comms rooms.
- Hotels and hospitality: quiet bedroom units, public-area cooling and heat recovery for hotels.
In England, systems holding 5 tonnes CO2 equivalent of refrigerant or more fall under GB F-gas rules, with regular leak checks and records; buildings with more than 12 kW of air conditioning in total also need a periodic energy inspection.
Common questions from businesses in Catford
How much does a VRF system cost in Catford?
Guide prices in Catford run from about £3,150 to £6,350 per indoor unit (whole system), plus VAT. A typical job (office floor of 10–16 indoor units) costs £31,500–£101,995 plus VAT. We fix the price in writing after a free survey.
Do you also cover Blackheath, Greenwich and Beckenham?
Yes. Alongside Catford, we also cover Blackheath, Greenwich and Beckenham. Each has its own page with local guide prices.
Which postcodes do you cover in Catford?
All of them, including SE6. Give us your postcode when you enquire and we will confirm the visit details.
When is VRF better than separate split systems?
Usually once you need more than about six to eight indoor units, want central control, or are short of space for outdoor units. One outdoor unit can replace many.
How long does a VRF system last?
With regular servicing, commercial VRF equipment commonly runs for 15 years or more. Lifespan depends on use, maintenance and the operating environment.
Talk to us about your premises in Catford
Free survey and fixed written quote. We reply with a guide price or to book the survey.