VRF and VRV systems in Clydebank
A free survey, a clear specification and a fixed price for VRF and VRV air conditioning in Clydebank.
- Free site survey and fixed written quote
- Unit sizes, refrigerant and price set out in writing
- Work planned around your opening hours
How much does a VRF system cost in Clydebank?
Our guide range in Clydebank is £2,350–£4,750 per indoor unit (whole system) before VAT; a typical job (office floor of 10–16 indoor units) is £23,500–£76,500 plus VAT. Your exact price is fixed in writing once we have surveyed.
VRF (variable refrigerant flow) — called VRV by some manufacturers — is a commercial air conditioning system where one outdoor unit, or a bank of them, serves many indoor units through a shared refrigerant network.
Where we work around Clydebank
In Clydebank, typical premises are high-street shops, offices above them, surgeries, salons and local industrial units. Glasgow is about 10 km away.
That includes premises in G81 and the surrounding districts. Nearby, we also cover Erskine (about 3 km), Renfrew (about 3 km) and Bearsden (about 5 km). Buildings across Dunbartonshire range from converted period offices to modern units with deep ceiling voids, so we measure each site rather than relying on a standard package.
What we do
- Heat load and diversity calculations for every zone
- Two-pipe (heat pump) or three-pipe / two-pipe heat recovery system design
- Refrigerant pipework sizing, branch selectors and refrigerant charge calculation
- Leak detection where the refrigerant concentration limits require it
- Phased installation, pressure testing, commissioning and full F-gas records
VRF / VRV prices in Clydebank
These guide prices are adjusted for Scotland, where labour and access costs run about 4% below the UK guide.
| Item | Guide price (ex VAT) | Inc VAT | Basis |
|---|---|---|---|
| Heat pump VRF, per indoor unit | £2,350–£4,250 | £2,820–£5,100 | per unit |
| Heat recovery VRF, per indoor unit | £2,850–£4,750 | £3,420–£5,700 | per unit |
| Central controller and BMS interface | £905–£3,795 | £1,086–£4,554 | per system |
| Refrigerant leak detection (per alarmed room) | £380–£860 | £456–£1,032 | per room |
| Crane lift for roof plant | £905–£2,850 | £1,086–£3,420 | per lift |
Ex VAT, installed system prices including outdoor plant shared across indoor units.
The steps for a project in Clydebank
Survey and loads
We calculate loads zone by zone and check roof or plant space, risers and ceiling voids.
System design
Outdoor units, indoor units, branch boxes and pipe sizes are designed together, including the refrigerant charge and any leak detection.
Phased first fix
Pipework and controls cabling go in floor by floor, often out of hours in occupied buildings. In Clydebank we agree timings around your opening hours.
Pressure test and charge
The network is pressure tested, evacuated and charged with the calculated refrigerant quantity.
Commissioning
Each indoor unit is commissioned and the controls set up, with as-fitted drawings and F-gas records handed over.
Before you book in Clydebank
Refrigerant in occupied rooms
Because one network carries a large refrigerant charge, small rooms on the system are checked against the safety limits in BS EN 378 and may need leak detection.
Conservation areas
Historic streets and listed buildings in and around Clydebank are more likely to need planning permission for outdoor units on visible elevations. We check with the local planning authority before work is booked.
Phasing
In occupied buildings we plan the work floor by floor so the business keeps running.
Neighbours and noise
Outdoor units near flats — common above shops — need careful siting so noise at neighbours' windows stays low. We choose positions and quieter units with that in mind.
Types of premises we cover in Clydebank
- Offices: zoned cooling and heating for open-plan floors, meeting rooms and comms rooms.
- Hotels and hospitality: quiet bedroom units, public-area cooling and heat recovery for hotels.
Compliance in Scotland: refrigerant work falls under GB F-gas rules, and systems with an effective output of 12 kW or more need a periodic energy inspection (often called TM44).
Questions about VRF / VRV in Clydebank
How much does a VRF system cost in Clydebank?
Guide prices in Clydebank run from about £2,350 to £4,750 per indoor unit (whole system), plus VAT. A typical job (office floor of 10–16 indoor units) costs £23,500–£76,500 plus VAT. We fix the price in writing after a free survey.
Do you also cover Erskine, Renfrew and Bearsden?
Yes. Alongside Clydebank, we also cover Erskine, Renfrew and Bearsden. Each has its own page with local guide prices.
Which postcodes do you cover in Clydebank?
All of them, including G81. Give us your postcode when you enquire and we will confirm the visit details.
What is the difference between VRF and VRV?
None in practice. VRV is one manufacturer's trademark; VRF is the generic name for the same type of system.
Does a VRF system need F-gas leak checks?
Usually yes. Most VRF systems hold enough refrigerant to exceed 5 tonnes CO2 equivalent, which triggers at least annual leak checks and record keeping.
Talk to us about your premises in Clydebank
Free survey and fixed written quote. We reply with a guide price or to book the survey.