0800 088 6248
Bank of VRF outdoor units on a steel platform with insulated refrigerant pipework

VRF and VRV systems in Paisley

VRF and VRV air conditioning for businesses in Paisley — surveyed, designed and priced in writing before any work starts.

  • Free site survey and fixed written quote
  • Unit sizes, refrigerant and price set out in writing
  • Work planned around your opening hours

How much does a VRF system cost in Paisley?

Our guide range in Paisley is £2,350–£4,750 per indoor unit (whole system) before VAT; a typical job (office floor of 10–16 indoor units) is £23,500–£76,500 plus VAT. The fixed price follows a free survey.

VRF (variable refrigerant flow) — called VRV by some manufacturers — is a commercial air conditioning system where one outdoor unit, or a bank of them, serves many indoor units through a shared refrigerant network.

Paisley and surrounding areas

In Paisley, typical commercial premises include town-centre shops and offices, surgeries, gyms and units on business parks. Glasgow is about 12 km away.

That includes premises in PA1 and PA2 and the surrounding districts. Neighbouring towns we cover include Barrhead, Renfrew and Johnstone. Buildings across Renfrewshire and Inverclyde range from converted period offices to modern units with deep ceiling voids, so we measure each site rather than relying on a standard package.

What you get

  • Heat load and diversity calculations for every zone
  • Two-pipe (heat pump) or three-pipe / two-pipe heat recovery system design
  • Leak detection where the refrigerant concentration limits require it
  • Central controls, scheduling and BMS integration
  • Phased installation, pressure testing, commissioning and full F-gas records

VRF / VRV prices in Paisley

These guide prices are adjusted for Scotland, where labour and access costs run about 4% below the UK guide.

VRF / VRV guide prices, Paisley
ItemGuide price (ex VAT)Inc VATBasis
Heat pump VRF, per indoor unit£2,350–£4,250£2,820–£5,100per unit
Heat recovery VRF, per indoor unit£2,850–£4,750£3,420–£5,700per unit
Central controller and BMS interface£905–£3,795£1,086–£4,554per system
Refrigerant leak detection (per alarmed room)£380–£860£456–£1,032per room
Crane lift for roof plant£905–£2,850£1,086–£3,420per lift

Ex VAT, installed system prices including outdoor plant shared across indoor units.

How it works in Paisley

  1. Survey and loads

    We calculate loads zone by zone and check roof or plant space, risers and ceiling voids.

  2. System design

    Outdoor units, indoor units, branch boxes and pipe sizes are designed together, including the refrigerant charge and any leak detection.

  3. Phased first fix

    Pipework and controls cabling go in floor by floor, often out of hours in occupied buildings. We keep work areas in Paisley screened and tidy at the end of each day.

  4. Pressure test and charge

    The network is pressure tested, evacuated and charged with the calculated refrigerant quantity.

  5. Commissioning

    Each indoor unit is commissioned and the controls set up, with as-fitted drawings and F-gas records handed over.

What to think about in Paisley

Refrigerant in occupied rooms

Because one network carries a large refrigerant charge, small rooms on the system are checked against the safety limits in BS EN 378 and may need leak detection.

Roof and height work

Flat roofs, high walls and atriums need the right access equipment and edge protection. We plan towers, MEWPs or scaffold before the job, not on the day.

Leak checks

Larger VRF systems usually exceed 5 tonnes CO2 equivalent, so they need at least annual F-gas leak checks — more often at 50 tonnes and above.

Shared buildings

In multi-let buildings, roof space, risers and plant areas are often controlled by a managing agent. We work to their permits and method-statement requirements.

Types of premises we cover in Paisley

  • Hotels and hospitality: quiet bedroom units, public-area cooling and heat recovery for hotels.
  • Offices: zoned cooling and heating for open-plan floors, meeting rooms and comms rooms.

Compliance in Scotland: refrigerant work falls under GB F-gas rules, and systems with an effective output of 12 kW or more need a periodic energy inspection (often called TM44).

Your questions answered

How much does a VRF system cost in Paisley?

Guide prices in Paisley run from about £2,350 to £4,750 per indoor unit (whole system), plus VAT. A typical job (office floor of 10–16 indoor units) costs £23,500–£76,500 plus VAT. We fix the price in writing after a free survey.

Do you also cover Barrhead, Renfrew and Johnstone?

Yes. Alongside Paisley, we also cover Barrhead, Renfrew and Johnstone. Each has its own page with local guide prices.

Which postcodes do you cover in Paisley?

All of them, including PA1 and PA2. Give us your postcode when you enquire and we will confirm the visit details.

Does a VRF system need F-gas leak checks?

Usually yes. Most VRF systems hold enough refrigerant to exceed 5 tonnes CO2 equivalent, which triggers at least annual leak checks and record keeping.

What is the difference between VRF and VRV?

None in practice. VRV is one manufacturer's trademark; VRF is the generic name for the same type of system.

Talk to us about your premises in Paisley

Free survey and fixed written quote. We reply with a guide price or to book the survey.

CallGet a quote