VRF and VRV systems in Islington
VRF and VRV air conditioning for businesses in Islington — surveyed, designed and priced in writing before any work starts.
- Free site survey and fixed written quote
- Unit sizes, refrigerant and price set out in writing
- Work planned around your opening hours
How much does a VRF system cost in Islington?
In Islington, guide prices run from about £3,150 to £6,350 per indoor unit (whole system), plus VAT. A typical job (office floor of 10–16 indoor units) usually comes to £31,500–£101,995 plus VAT. Your exact price is fixed in writing once we have surveyed.
VRF (variable refrigerant flow) — called VRV by some manufacturers — is a commercial air conditioning system where one outdoor unit, or a bank of them, serves many indoor units through a shared refrigerant network.
Where we work around Islington
Premises in Islington are often in mixed-use buildings with shared roofs and tight access, so outdoor unit positions are agreed early.
We work across Islington's postcode districts, including EC1P, EC4P, EC50, N1, N1C and N1P. Nearby, we also cover Highbury (about 2 km), Holloway (about 2 km) and Camden Town (about 3 km). VRF and VRV air conditioning in Islington is priced from a written specification: unit sizes, positions, pipe routes, condensate, electrics, controls and commissioning are all listed.
Included as standard
- Heat load and diversity calculations for every zone
- Two-pipe (heat pump) or three-pipe / two-pipe heat recovery system design
- Refrigerant pipework sizing, branch selectors and refrigerant charge calculation
- Leak detection where the refrigerant concentration limits require it
- Central controls, scheduling and BMS integration
Guide prices in Islington
Prices below include our regional adjustment for London (28% above the UK guide).
| Item | Guide price (ex VAT) | Inc VAT | Basis |
|---|---|---|---|
| Heat pump VRF, per indoor unit | £3,150–£5,695 | £3,780–£6,834 | per unit |
| Heat recovery VRF, per indoor unit | £3,795–£6,350 | £4,554–£7,620 | per unit |
| Central controller and BMS interface | £1,195–£5,050 | £1,434–£6,060 | per system |
| Refrigerant leak detection (per alarmed room) | £505–£1,150 | £606–£1,380 | per room |
| Crane lift for roof plant | £1,195–£3,795 | £1,434–£4,554 | per lift |
Ex VAT, installed system prices including outdoor plant shared across indoor units.
The steps for a project in Islington
Survey and loads
We calculate loads zone by zone and check roof or plant space, risers and ceiling voids.
System design
Outdoor units, indoor units, branch boxes and pipe sizes are designed together, including the refrigerant charge and any leak detection.
Phased first fix
Pipework and controls cabling go in floor by floor, often out of hours in occupied buildings. We keep work areas in Islington screened and tidy at the end of each day.
Pressure test and charge
The network is pressure tested, evacuated and charged with the calculated refrigerant quantity.
Commissioning
Each indoor unit is commissioned and the controls set up, with as-fitted drawings and F-gas records handed over.
Local points to consider
Plant space
Outdoor units need clear air flow, structural support and safe access for servicing.
Leased premises
If your Islington premises are leased, the landlord's written consent is usually needed for external units, wall penetrations and roof access. We provide drawings and data sheets for the request.
Leak checks
Larger VRF systems usually exceed 5 tonnes CO2 equivalent, so they need at least annual F-gas leak checks — more often at 50 tonnes and above.
Neighbours and noise
Outdoor units near flats — common above shops — need careful siting so noise at neighbours' windows stays low. We choose positions and quieter units with that in mind.
Types of premises we cover in Islington
- Hotels and hospitality: quiet bedroom units, public-area cooling and heat recovery for hotels.
- Offices: zoned cooling and heating for open-plan floors, meeting rooms and comms rooms.
Compliance in England: refrigerant work falls under GB F-gas rules, and buildings with more than 12 kW of air conditioning in total need a periodic energy inspection (often called TM44).
Your questions answered
How much does a VRF system cost in Islington?
Guide prices in Islington run from about £3,150 to £6,350 per indoor unit (whole system), plus VAT. A typical job (office floor of 10–16 indoor units) costs £31,500–£101,995 plus VAT. We fix the price in writing after a free survey.
Do you also cover Highbury, Holloway and Camden Town?
Yes. Alongside Islington, we also cover Highbury, Holloway and Camden Town. Each has its own page with local guide prices.
Which postcodes do you cover in Islington?
All of them, including EC1P, EC4P, EC50 and N1. Give us your postcode when you enquire and we will confirm the visit details.
Does a VRF system need F-gas leak checks?
Usually yes. Most VRF systems hold enough refrigerant to exceed 5 tonnes CO2 equivalent, which triggers at least annual leak checks and record keeping.
How long does a VRF system last?
With regular servicing, commercial VRF equipment commonly runs for 15 years or more. Lifespan depends on use, maintenance and the operating environment.
Need VRF and VRV air conditioning in Islington?
Free survey and fixed written quote. We reply with a guide price or to book the survey.