VRF and VRV systems in Kelso
VRF and VRV air conditioning for businesses in Kelso — surveyed, designed and priced in writing before any work starts.
- Free site survey and fixed written quote
- Unit sizes, refrigerant and price set out in writing
- Work planned around your opening hours
How much does a VRF system cost in Kelso?
In Kelso, guide prices run from about £2,350 to £4,750 per indoor unit (whole system), plus VAT. A typical job (office floor of 10–16 indoor units) usually comes to £23,500–£76,500 plus VAT. You get a fixed written quote after the free survey.
VRF (variable refrigerant flow) — called VRV by some manufacturers — is a commercial air conditioning system where one outdoor unit, or a bank of them, serves many indoor units through a shared refrigerant network.
Working in Kelso
In a town like Kelso, a single wall unit for a shop or a cassette for a surgery makes a real difference in summer.
We cover every Kelso postcode, including TD5. VRF and VRV air conditioning in Kelso is priced from a written specification: unit sizes, positions, pipe routes, condensate, electrics, controls and commissioning are all listed.
Included as standard
- Heat load and diversity calculations for every zone
- Two-pipe (heat pump) or three-pipe / two-pipe heat recovery system design
- Refrigerant pipework sizing, branch selectors and refrigerant charge calculation
- Leak detection where the refrigerant concentration limits require it
- Phased installation, pressure testing, commissioning and full F-gas records
Local guide prices for Kelso
Prices below include our regional adjustment for Scotland (4% below the UK guide).
| Item | Guide price (ex VAT) | Inc VAT | Basis |
|---|---|---|---|
| Heat pump VRF, per indoor unit | £2,350–£4,250 | £2,820–£5,100 | per unit |
| Heat recovery VRF, per indoor unit | £2,850–£4,750 | £3,420–£5,700 | per unit |
| Central controller and BMS interface | £905–£3,795 | £1,086–£4,554 | per system |
| Refrigerant leak detection (per alarmed room) | £380–£860 | £456–£1,032 | per room |
| Crane lift for roof plant | £905–£2,850 | £1,086–£3,420 | per lift |
Ex VAT, installed system prices including outdoor plant shared across indoor units.
From enquiry to handover in Kelso
Survey and loads
We calculate loads zone by zone and check roof or plant space, risers and ceiling voids. For sites in Kelso we confirm access and parking beforehand.
System design
Outdoor units, indoor units, branch boxes and pipe sizes are designed together, including the refrigerant charge and any leak detection.
Phased first fix
Pipework and controls cabling go in floor by floor, often out of hours in occupied buildings.
Pressure test and charge
The network is pressure tested, evacuated and charged with the calculated refrigerant quantity.
Commissioning
Each indoor unit is commissioned and the controls set up, with as-fitted drawings and F-gas records handed over.
Points to plan for in Kelso
Plant space
Outdoor units need clear air flow, structural support and safe access for servicing.
Leased premises
If your Kelso premises are leased, the landlord's written consent is usually needed for external units, wall penetrations and roof access. We provide drawings and data sheets for the request.
Phasing
In occupied buildings we plan the work floor by floor so the business keeps running.
Shared buildings
In multi-let buildings, roof space, risers and plant areas are often controlled by a managing agent. We work to their permits and method-statement requirements.
Types of premises we cover in Kelso
- Hotels and hospitality: quiet bedroom units, public-area cooling and heat recovery for hotels.
- Offices: zoned cooling and heating for open-plan floors, meeting rooms and comms rooms.
Compliance in Scotland: refrigerant work falls under GB F-gas rules, and systems with an effective output of 12 kW or more need a periodic energy inspection (often called TM44).
Your questions answered
How much does a VRF system cost in Kelso?
Guide prices in Kelso run from about £2,350 to £4,750 per indoor unit (whole system), plus VAT. A typical job (office floor of 10–16 indoor units) costs £23,500–£76,500 plus VAT. We fix the price in writing after a free survey.
Do you also cover Galashiels and Hawick?
Yes. Alongside Kelso, we also cover Galashiels and Hawick. Each has its own page with local guide prices.
Which postcodes do you cover in Kelso?
All of them, including TD5. Give us your postcode when you enquire and we will confirm the visit details.
Does a VRF system need F-gas leak checks?
Usually yes. Most VRF systems hold enough refrigerant to exceed 5 tonnes CO2 equivalent, which triggers at least annual leak checks and record keeping.
Can VRF connect to our BMS?
Yes, through the manufacturer's interface. We specify the right gateway at design stage.
Need VRF and VRV air conditioning in Kelso?
Free survey and fixed written quote. We reply with a guide price or to book the survey.