VRF and VRV systems in Mitcham
VRF and VRV air conditioning in Mitcham, sized to the real heat load of your premises rather than guessed from the floor area.
- Free site survey and fixed written quote
- Unit sizes, refrigerant and price set out in writing
- Work planned around your opening hours
How much does a VRF system cost in Mitcham?
In Mitcham, guide prices run from about £3,150 to £6,350 per indoor unit (whole system), plus VAT. A typical job (office floor of 10–16 indoor units) usually comes to £31,500–£101,995 plus VAT. The fixed price follows a free survey.
VRF (variable refrigerant flow) — called VRV by some manufacturers — is a commercial air conditioning system where one outdoor unit, or a bank of them, serves many indoor units through a shared refrigerant network.
Working in Mitcham
Premises in Mitcham are often in mixed-use buildings with shared roofs and tight access, so outdoor unit positions are agreed early.
Postcode districts we cover in Mitcham include CR4. We also work in nearby Morden, Wimbledon and Streatham. Buildings across London range from converted period offices to modern units with deep ceiling voids, so we measure each site rather than relying on a standard package.
What the job covers
- Heat load and diversity calculations for every zone
- Two-pipe (heat pump) or three-pipe / two-pipe heat recovery system design
- Leak detection where the refrigerant concentration limits require it
- Central controls, scheduling and BMS integration
- Phased installation, pressure testing, commissioning and full F-gas records
Guide prices in Mitcham
These guide prices are adjusted for London, where labour and access costs run about 28% above the UK guide.
| Item | Guide price (ex VAT) | Inc VAT | Basis |
|---|---|---|---|
| Heat pump VRF, per indoor unit | £3,150–£5,695 | £3,780–£6,834 | per unit |
| Heat recovery VRF, per indoor unit | £3,795–£6,350 | £4,554–£7,620 | per unit |
| Central controller and BMS interface | £1,195–£5,050 | £1,434–£6,060 | per system |
| Refrigerant leak detection (per alarmed room) | £505–£1,150 | £606–£1,380 | per room |
| Crane lift for roof plant | £1,195–£3,795 | £1,434–£4,554 | per lift |
Ex VAT, installed system prices including outdoor plant shared across indoor units.
How a job in Mitcham works
Survey and loads
We calculate loads zone by zone and check roof or plant space, risers and ceiling voids. For sites in Mitcham we confirm access and parking beforehand.
System design
Outdoor units, indoor units, branch boxes and pipe sizes are designed together, including the refrigerant charge and any leak detection.
Phased first fix
Pipework and controls cabling go in floor by floor, often out of hours in occupied buildings.
Pressure test and charge
The network is pressure tested, evacuated and charged with the calculated refrigerant quantity.
Commissioning
Each indoor unit is commissioned and the controls set up, with as-fitted drawings and F-gas records handed over.
Local points to consider
Plant space
Outdoor units need clear air flow, structural support and safe access for servicing.
Neighbours and noise
Outdoor units near flats — common above shops — need careful siting so noise at neighbours' windows stays low. We choose positions and quieter units with that in mind.
Phasing
In occupied buildings we plan the work floor by floor so the business keeps running.
Conservation areas
Historic streets and listed buildings in and around Mitcham are more likely to need planning permission for outdoor units on visible elevations. We check with the local planning authority before work is booked.
Who we work with in Mitcham
- Offices: zoned cooling and heating for open-plan floors, meeting rooms and comms rooms.
- Hotels and hospitality: quiet bedroom units, public-area cooling and heat recovery for hotels.
Two rules matter for most businesses in England: GB F-gas rules (leak checks from 5 tonnes CO2e) and the periodic energy inspection for more than 12 kW of air conditioning.
Common questions from businesses in Mitcham
How much does a VRF system cost in Mitcham?
Guide prices in Mitcham run from about £3,150 to £6,350 per indoor unit (whole system), plus VAT. A typical job (office floor of 10–16 indoor units) costs £31,500–£101,995 plus VAT. We fix the price in writing after a free survey.
Do you also cover Morden, Wimbledon and Streatham?
Yes. Alongside Mitcham, we also cover Morden, Wimbledon and Streatham. Each has its own page with local guide prices.
Which postcodes do you cover in Mitcham?
All of them, including CR4. Give us your postcode when you enquire and we will confirm the visit details.
Can VRF connect to our BMS?
Yes, through the manufacturer's interface. We specify the right gateway at design stage.
Does a VRF system need F-gas leak checks?
Usually yes. Most VRF systems hold enough refrigerant to exceed 5 tonnes CO2 equivalent, which triggers at least annual leak checks and record keeping.
Need VRF and VRV air conditioning in Mitcham?
Free survey and fixed written quote. We reply with a guide price or to book the survey.