VRF and VRV systems in Perth
VRF and VRV air conditioning in Perth, sized to the real heat load of your premises rather than guessed from the floor area.
- Free site survey and fixed written quote
- Unit sizes, refrigerant and price set out in writing
- Work planned around your opening hours
How much does a VRF system cost in Perth?
In Perth, guide prices run from about £2,350 to £4,750 per indoor unit (whole system), plus VAT. A typical job (office floor of 10–16 indoor units) usually comes to £23,500–£76,500 plus VAT. Your exact price is fixed in writing once we have surveyed.
VRF (variable refrigerant flow) — called VRV by some manufacturers — is a commercial air conditioning system where one outdoor unit, or a bank of them, serves many indoor units through a shared refrigerant network.
Where we work around Perth
Businesses in Perth range from independent shops and restaurants to offices, clinics and warehouses. Dundee is about 29 km away.
We work across Perth's postcode districts, including PH1. We also cover Auchterarder, Blairgowrie and Crieff, all within easy reach of Perth. In Perth, outdoor unit positions are often the deciding factor: a rear flat roof or yard is usually straightforward, while a front elevation may need landlord or planning consent first.
What is included
- Heat load and diversity calculations for every zone
- Two-pipe (heat pump) or three-pipe / two-pipe heat recovery system design
- Leak detection where the refrigerant concentration limits require it
- Central controls, scheduling and BMS integration
- Phased installation, pressure testing, commissioning and full F-gas records
Guide prices in Perth
Guide prices for Perth, set for Scotland. Your fixed price comes in writing.
| Item | Guide price (ex VAT) | Inc VAT | Basis |
|---|---|---|---|
| Heat pump VRF, per indoor unit | £2,350–£4,250 | £2,820–£5,100 | per unit |
| Heat recovery VRF, per indoor unit | £2,850–£4,750 | £3,420–£5,700 | per unit |
| Central controller and BMS interface | £905–£3,795 | £1,086–£4,554 | per system |
| Refrigerant leak detection (per alarmed room) | £380–£860 | £456–£1,032 | per room |
| Crane lift for roof plant | £905–£2,850 | £1,086–£3,420 | per lift |
Ex VAT, installed system prices including outdoor plant shared across indoor units.
The steps for a project in Perth
Survey and loads
We calculate loads zone by zone and check roof or plant space, risers and ceiling voids. For sites in Perth we confirm access and parking beforehand.
System design
Outdoor units, indoor units, branch boxes and pipe sizes are designed together, including the refrigerant charge and any leak detection.
Phased first fix
Pipework and controls cabling go in floor by floor, often out of hours in occupied buildings.
Pressure test and charge
The network is pressure tested, evacuated and charged with the calculated refrigerant quantity.
Commissioning
Each indoor unit is commissioned and the controls set up, with as-fitted drawings and F-gas records handed over.
Things to check in Perth
Leak checks
Larger VRF systems usually exceed 5 tonnes CO2 equivalent, so they need at least annual F-gas leak checks — more often at 50 tonnes and above.
Shared buildings
In multi-let buildings, roof space, risers and plant areas are often controlled by a managing agent. We work to their permits and method-statement requirements.
Phasing
In occupied buildings we plan the work floor by floor so the business keeps running.
Working hours
Most Perth businesses prefer noisy work outside trading hours. Early starts, evenings and weekends can be arranged and are priced up front.
Typical premises in Perth
- Offices: zoned cooling and heating for open-plan floors, meeting rooms and comms rooms.
- Hotels and hospitality: quiet bedroom units, public-area cooling and heat recovery for hotels.
Compliance in Scotland: refrigerant work falls under GB F-gas rules, and systems with an effective output of 12 kW or more need a periodic energy inspection (often called TM44).
Common questions from businesses in Perth
How much does a VRF system cost in Perth?
Guide prices in Perth run from about £2,350 to £4,750 per indoor unit (whole system), plus VAT. A typical job (office floor of 10–16 indoor units) costs £23,500–£76,500 plus VAT. We fix the price in writing after a free survey.
Do you also cover Auchterarder, Blairgowrie and Crieff?
Yes. Alongside Perth, we also cover Auchterarder, Blairgowrie and Crieff. Each has its own page with local guide prices.
Which postcodes do you cover in Perth?
All of them, including PH1. Give us your postcode when you enquire and we will confirm the visit details.
Can VRF connect to our BMS?
Yes, through the manufacturer's interface. We specify the right gateway at design stage.
When is VRF better than separate split systems?
Usually once you need more than about six to eight indoor units, want central control, or are short of space for outdoor units. One outdoor unit can replace many.
Need VRF and VRV air conditioning in Perth?
Free survey and fixed written quote. We reply with a guide price or to book the survey.