VRF and VRV systems in Dundee
From a single room to a whole floor: VRF and VRV air conditioning in Dundee, planned around your trading hours.
- Free site survey and fixed written quote
- Unit sizes, refrigerant and price set out in writing
- Work planned around your opening hours
How much does a VRF system cost in Dundee?
Our guide range in Dundee is £2,350–£4,750 per indoor unit (whole system) before VAT; a typical job (office floor of 10–16 indoor units) is £23,500–£76,500 plus VAT. You get a fixed written quote after the free survey.
VRF (variable refrigerant flow) — called VRV by some manufacturers — is a commercial air conditioning system where one outdoor unit, or a bank of them, serves many indoor units through a shared refrigerant network.
Dundee and surrounding areas
In Dundee, typical commercial premises include town-centre shops and offices, surgeries, gyms and units on business parks.
We work across Dundee's postcode districts, including DD1. We also work in nearby St Andrews, Forfar and Arbroath. Buildings across Dundee and Angus range from converted period offices to modern units with deep ceiling voids, so we measure each site rather than relying on a standard package.
Included as standard
- Heat load and diversity calculations for every zone
- Two-pipe (heat pump) or three-pipe / two-pipe heat recovery system design
- Leak detection where the refrigerant concentration limits require it
- Central controls, scheduling and BMS integration
- Phased installation, pressure testing, commissioning and full F-gas records
VRF / VRV prices in Dundee
These guide prices are adjusted for Scotland, where labour and access costs run about 4% below the UK guide.
| Item | Guide price (ex VAT) | Inc VAT | Basis |
|---|---|---|---|
| Heat pump VRF, per indoor unit | £2,350–£4,250 | £2,820–£5,100 | per unit |
| Heat recovery VRF, per indoor unit | £2,850–£4,750 | £3,420–£5,700 | per unit |
| Central controller and BMS interface | £905–£3,795 | £1,086–£4,554 | per system |
| Refrigerant leak detection (per alarmed room) | £380–£860 | £456–£1,032 | per room |
| Crane lift for roof plant | £905–£2,850 | £1,086–£3,420 | per lift |
Ex VAT, installed system prices including outdoor plant shared across indoor units.
The steps for a project in Dundee
Survey and loads
We calculate loads zone by zone and check roof or plant space, risers and ceiling voids.
System design
Outdoor units, indoor units, branch boxes and pipe sizes are designed together, including the refrigerant charge and any leak detection.
Phased first fix
Pipework and controls cabling go in floor by floor, often out of hours in occupied buildings. We keep work areas in Dundee screened and tidy at the end of each day.
Pressure test and charge
The network is pressure tested, evacuated and charged with the calculated refrigerant quantity.
Commissioning
Each indoor unit is commissioned and the controls set up, with as-fitted drawings and F-gas records handed over.
Points to plan for in Dundee
Leak checks
Larger VRF systems usually exceed 5 tonnes CO2 equivalent, so they need at least annual F-gas leak checks — more often at 50 tonnes and above.
Conservation areas
Historic streets and listed buildings in and around Dundee are more likely to need planning permission for outdoor units on visible elevations. We check with the local planning authority before work is booked.
Refrigerant in occupied rooms
Because one network carries a large refrigerant charge, small rooms on the system are checked against the safety limits in BS EN 378 and may need leak detection.
Neighbours and noise
Outdoor units near flats — common above shops — need careful siting so noise at neighbours' windows stays low. We choose positions and quieter units with that in mind.
Who we work with in Dundee
- Hotels and hospitality: quiet bedroom units, public-area cooling and heat recovery for hotels.
- Offices: zoned cooling and heating for open-plan floors, meeting rooms and comms rooms.
Compliance in Scotland: refrigerant work falls under GB F-gas rules, and systems with an effective output of 12 kW or more need a periodic energy inspection (often called TM44).
Questions about VRF / VRV in Dundee
How much does a VRF system cost in Dundee?
Guide prices in Dundee run from about £2,350 to £4,750 per indoor unit (whole system), plus VAT. A typical job (office floor of 10–16 indoor units) costs £23,500–£76,500 plus VAT. We fix the price in writing after a free survey.
Do you also cover St Andrews, Forfar and Arbroath?
Yes. Alongside Dundee, we also cover St Andrews, Forfar and Arbroath. Each has its own page with local guide prices.
Which postcodes do you cover in Dundee?
All of them, including DD1. Give us your postcode when you enquire and we will confirm the visit details.
Does a VRF system need F-gas leak checks?
Usually yes. Most VRF systems hold enough refrigerant to exceed 5 tonnes CO2 equivalent, which triggers at least annual leak checks and record keeping.
What is the difference between VRF and VRV?
None in practice. VRV is one manufacturer's trademark; VRF is the generic name for the same type of system.
Talk to us about your premises in Dundee
Free survey and fixed written quote. We reply with a guide price or to book the survey.