VRF and VRV systems in Portishead
VRF and VRV air conditioning in Portishead, sized to the real heat load of your premises rather than guessed from the floor area.
- Free site survey and fixed written quote
- Unit sizes, refrigerant and price set out in writing
- Work planned around your opening hours
How much does a VRF system cost in Portishead?
Budget roughly £2,550–£5,150 per indoor unit (whole system) ex VAT in Portishead. For a typical job — office floor of 10–16 indoor units — expect £25,500–£82,500 plus VAT. Your exact price is fixed in writing once we have surveyed.
VRF (variable refrigerant flow) — called VRV by some manufacturers — is a commercial air conditioning system where one outdoor unit, or a bank of them, serves many indoor units through a shared refrigerant network.
Where we work around Portishead
Portishead has a compact centre of shops, cafés and offices, with business units on its outskirts. Bristol is about 13 km away.
Postcode districts we cover in Portishead include BS20. We also cover Nailsea, Clevedon and Keynsham, all within easy reach of Portishead. For VRF and VRV air conditioning in Portishead, the survey looks at where the outdoor unit can go, how pipework will reach the indoor units and whether the electrical supply has capacity.
What we do
- Heat load and diversity calculations for every zone
- Two-pipe (heat pump) or three-pipe / two-pipe heat recovery system design
- Refrigerant pipework sizing, branch selectors and refrigerant charge calculation
- Leak detection where the refrigerant concentration limits require it
- Central controls, scheduling and BMS integration
Local guide prices for Portishead
Guide prices for Portishead, set for the South West. Your fixed price comes in writing.
| Item | Guide price (ex VAT) | Inc VAT | Basis |
|---|---|---|---|
| Heat pump VRF, per indoor unit | £2,550–£4,650 | £3,060–£5,580 | per unit |
| Heat recovery VRF, per indoor unit | £3,050–£5,150 | £3,660–£6,180 | per unit |
| Central controller and BMS interface | £985–£4,095 | £1,182–£4,914 | per system |
| Refrigerant leak detection (per alarmed room) | £410–£930 | £492–£1,116 | per room |
| Crane lift for roof plant | £985–£3,050 | £1,182–£3,660 | per lift |
Ex VAT, installed system prices including outdoor plant shared across indoor units.
From enquiry to handover in Portishead
Survey and loads
We calculate loads zone by zone and check roof or plant space, risers and ceiling voids. For sites in Portishead we confirm access and parking beforehand.
System design
Outdoor units, indoor units, branch boxes and pipe sizes are designed together, including the refrigerant charge and any leak detection.
Phased first fix
Pipework and controls cabling go in floor by floor, often out of hours in occupied buildings.
Pressure test and charge
The network is pressure tested, evacuated and charged with the calculated refrigerant quantity.
Commissioning
Each indoor unit is commissioned and the controls set up, with as-fitted drawings and F-gas records handed over.
Things to check in Portishead
Plant space
Outdoor units need clear air flow, structural support and safe access for servicing.
Roof and height work
Flat roofs, high walls and atriums need the right access equipment and edge protection. We plan towers, MEWPs or scaffold before the job, not on the day.
Phasing
In occupied buildings we plan the work floor by floor so the business keeps running.
Leased premises
If your Portishead premises are leased, the landlord's written consent is usually needed for external units, wall penetrations and roof access. We provide drawings and data sheets for the request.
Types of premises we cover in Portishead
- Offices: zoned cooling and heating for open-plan floors, meeting rooms and comms rooms.
- Hotels and hospitality: quiet bedroom units, public-area cooling and heat recovery for hotels.
Compliance in England: refrigerant work falls under GB F-gas rules, and buildings with more than 12 kW of air conditioning in total need a periodic energy inspection (often called TM44).
Your questions answered
How much does a VRF system cost in Portishead?
Guide prices in Portishead run from about £2,550 to £5,150 per indoor unit (whole system), plus VAT. A typical job (office floor of 10–16 indoor units) costs £25,500–£82,500 plus VAT. We fix the price in writing after a free survey.
Do you also cover Nailsea, Clevedon and Keynsham?
Yes. Alongside Portishead, we also cover Nailsea, Clevedon and Keynsham. Each has its own page with local guide prices.
Which postcodes do you cover in Portishead?
All of them, including BS20. Give us your postcode when you enquire and we will confirm the visit details.
Can VRF connect to our BMS?
Yes, through the manufacturer's interface. We specify the right gateway at design stage.
What is the difference between VRF and VRV?
None in practice. VRV is one manufacturer's trademark; VRF is the generic name for the same type of system.
Talk to us about your premises in Portishead
Free survey and fixed written quote. We reply with a guide price or to book the survey.