VRF and VRV systems in Yate
VRF and VRV air conditioning in Yate, sized to the real heat load of your premises rather than guessed from the floor area.
- Free site survey and fixed written quote
- Unit sizes, refrigerant and price set out in writing
- Work planned around your opening hours
How much does a VRF system cost in Yate?
Our guide range in Yate is £2,550–£5,150 per indoor unit (whole system) before VAT; a typical job (office floor of 10–16 indoor units) is £25,500–£82,500 plus VAT. Your exact price is fixed in writing once we have surveyed.
VRF (variable refrigerant flow) — called VRV by some manufacturers — is a commercial air conditioning system where one outdoor unit, or a bank of them, serves many indoor units through a shared refrigerant network.
Where we work around Yate
In a town like Yate, a single wall unit for a shop or a cassette for a surgery makes a real difference in summer. Bristol is about 15 km away.
Postcode districts we cover in Yate include BS37. Nearby, we also cover Keynsham (about 15 km), Bath (about 19 km) and Chippenham (about 22 km). In Yate, outdoor unit positions are often the deciding factor: a rear flat roof or yard is usually straightforward, while a front elevation may need landlord or planning consent first.
What the job covers
- Heat load and diversity calculations for every zone
- Two-pipe (heat pump) or three-pipe / two-pipe heat recovery system design
- Refrigerant pipework sizing, branch selectors and refrigerant charge calculation
- Leak detection where the refrigerant concentration limits require it
- Phased installation, pressure testing, commissioning and full F-gas records
VRF / VRV prices in Yate
Guide prices for Yate, set for the South West. Your fixed price comes in writing.
| Item | Guide price (ex VAT) | Inc VAT | Basis |
|---|---|---|---|
| Heat pump VRF, per indoor unit | £2,550–£4,650 | £3,060–£5,580 | per unit |
| Heat recovery VRF, per indoor unit | £3,050–£5,150 | £3,660–£6,180 | per unit |
| Central controller and BMS interface | £985–£4,095 | £1,182–£4,914 | per system |
| Refrigerant leak detection (per alarmed room) | £410–£930 | £492–£1,116 | per room |
| Crane lift for roof plant | £985–£3,050 | £1,182–£3,660 | per lift |
Ex VAT, installed system prices including outdoor plant shared across indoor units.
From enquiry to handover in Yate
Survey and loads
We calculate loads zone by zone and check roof or plant space, risers and ceiling voids. For sites in Yate we confirm access and parking beforehand.
System design
Outdoor units, indoor units, branch boxes and pipe sizes are designed together, including the refrigerant charge and any leak detection.
Phased first fix
Pipework and controls cabling go in floor by floor, often out of hours in occupied buildings.
Pressure test and charge
The network is pressure tested, evacuated and charged with the calculated refrigerant quantity.
Commissioning
Each indoor unit is commissioned and the controls set up, with as-fitted drawings and F-gas records handed over.
Before you book in Yate
Phasing
In occupied buildings we plan the work floor by floor so the business keeps running.
Working hours
Most Yate businesses prefer noisy work outside trading hours. Early starts, evenings and weekends can be arranged and are priced up front.
Leak checks
Larger VRF systems usually exceed 5 tonnes CO2 equivalent, so they need at least annual F-gas leak checks — more often at 50 tonnes and above.
Conservation areas
Historic streets and listed buildings in and around Yate are more likely to need planning permission for outdoor units on visible elevations. We check with the local planning authority before work is booked.
Types of premises we cover in Yate
- Hotels and hospitality: quiet bedroom units, public-area cooling and heat recovery for hotels.
- Offices: zoned cooling and heating for open-plan floors, meeting rooms and comms rooms.
Two rules matter for most businesses in England: GB F-gas rules (leak checks from 5 tonnes CO2e) and the periodic energy inspection for more than 12 kW of air conditioning.
Your questions answered
How much does a VRF system cost in Yate?
Guide prices in Yate run from about £2,550 to £5,150 per indoor unit (whole system), plus VAT. A typical job (office floor of 10–16 indoor units) costs £25,500–£82,500 plus VAT. We fix the price in writing after a free survey.
Do you also cover Keynsham, Bath and Chippenham?
Yes. Alongside Yate, we also cover Keynsham, Bath and Chippenham. Each has its own page with local guide prices.
Which postcodes do you cover in Yate?
All of them, including BS37. Give us your postcode when you enquire and we will confirm the visit details.
Can VRF connect to our BMS?
Yes, through the manufacturer's interface. We specify the right gateway at design stage.
What is the difference between VRF and VRV?
None in practice. VRV is one manufacturer's trademark; VRF is the generic name for the same type of system.
Talk to us about your premises in Yate
Free survey and fixed written quote. We reply with a guide price or to book the survey.