0800 088 6248
Bank of VRF outdoor units on a steel platform with insulated refrigerant pipework

VRF and VRV systems in Ruislip

VRF and VRV air conditioning in Ruislip, sized to the real heat load of your premises rather than guessed from the floor area.

  • Free site survey and fixed written quote
  • Unit sizes, refrigerant and price set out in writing
  • Work planned around your opening hours

How much does a VRF system cost in Ruislip?

Budget roughly £3,150–£6,350 per indoor unit (whole system) ex VAT in Ruislip. For a typical job — office floor of 10–16 indoor units — expect £31,500–£101,995 plus VAT. Your exact price is fixed in writing once we have surveyed.

VRF (variable refrigerant flow) — called VRV by some manufacturers — is a commercial air conditioning system where one outdoor unit, or a bank of them, serves many indoor units through a shared refrigerant network.

Where we work around Ruislip

Premises in Ruislip are often in mixed-use buildings with shared roofs and tight access, so outdoor unit positions are agreed early.

Postcode districts we cover in Ruislip include HA4. We also work in nearby Pinner, Northolt and Uxbridge. Buildings across London range from converted period offices to modern units with deep ceiling voids, so we measure each site rather than relying on a standard package.

What you get

  • Heat load and diversity calculations for every zone
  • Two-pipe (heat pump) or three-pipe / two-pipe heat recovery system design
  • Refrigerant pipework sizing, branch selectors and refrigerant charge calculation
  • Leak detection where the refrigerant concentration limits require it
  • Central controls, scheduling and BMS integration

Prices in Ruislip

These guide prices are adjusted for London, where labour and access costs run about 28% above the UK guide.

VRF / VRV guide prices, Ruislip
ItemGuide price (ex VAT)Inc VATBasis
Heat pump VRF, per indoor unit£3,150–£5,695£3,780–£6,834per unit
Heat recovery VRF, per indoor unit£3,795–£6,350£4,554–£7,620per unit
Central controller and BMS interface£1,195–£5,050£1,434–£6,060per system
Refrigerant leak detection (per alarmed room)£505–£1,150£606–£1,380per room
Crane lift for roof plant£1,195–£3,795£1,434–£4,554per lift

Ex VAT, installed system prices including outdoor plant shared across indoor units.

How we work in Ruislip

  1. Survey and loads

    We calculate loads zone by zone and check roof or plant space, risers and ceiling voids.

  2. System design

    Outdoor units, indoor units, branch boxes and pipe sizes are designed together, including the refrigerant charge and any leak detection.

  3. Phased first fix

    Pipework and controls cabling go in floor by floor, often out of hours in occupied buildings. In Ruislip we agree timings around your opening hours.

  4. Pressure test and charge

    The network is pressure tested, evacuated and charged with the calculated refrigerant quantity.

  5. Commissioning

    Each indoor unit is commissioned and the controls set up, with as-fitted drawings and F-gas records handed over.

Local points to consider

Phasing

In occupied buildings we plan the work floor by floor so the business keeps running.

Conservation areas

Historic streets and listed buildings in and around Ruislip are more likely to need planning permission for outdoor units on visible elevations. We check with the local planning authority before work is booked.

Leak checks

Larger VRF systems usually exceed 5 tonnes CO2 equivalent, so they need at least annual F-gas leak checks — more often at 50 tonnes and above.

Working hours

Most Ruislip businesses prefer noisy work outside trading hours. Early starts, evenings and weekends can be arranged and are priced up front.

Typical premises in Ruislip

  • Hotels and hospitality: quiet bedroom units, public-area cooling and heat recovery for hotels.
  • Offices: zoned cooling and heating for open-plan floors, meeting rooms and comms rooms.

In England, systems holding 5 tonnes CO2 equivalent of refrigerant or more fall under GB F-gas rules, with regular leak checks and records; buildings with more than 12 kW of air conditioning in total also need a periodic energy inspection.

FAQs for Ruislip

How much does a VRF system cost in Ruislip?

Guide prices in Ruislip run from about £3,150 to £6,350 per indoor unit (whole system), plus VAT. A typical job (office floor of 10–16 indoor units) costs £31,500–£101,995 plus VAT. We fix the price in writing after a free survey.

Do you also cover Pinner, Northolt and Uxbridge?

Yes. Alongside Ruislip, we also cover Pinner, Northolt and Uxbridge. Each has its own page with local guide prices.

Which postcodes do you cover in Ruislip?

All of them, including HA4. Give us your postcode when you enquire and we will confirm the visit details.

What is heat recovery VRF?

A version that can cool some zones and heat others at the same time, moving heat around the building instead of dumping it outside.

When is VRF better than separate split systems?

Usually once you need more than about six to eight indoor units, want central control, or are short of space for outdoor units. One outdoor unit can replace many.

Get a guide price for Ruislip

Free survey and fixed written quote. We reply with a guide price or to book the survey.

CallGet a quote