0800 088 6248
Bank of VRF outdoor units on a steel platform with insulated refrigerant pipework

VRF and VRV systems in Walton-on-Thames

A free survey, a clear specification and a fixed price for VRF and VRV air conditioning in Walton-on-Thames.

  • Free site survey and fixed written quote
  • Unit sizes, refrigerant and price set out in writing
  • Work planned around your opening hours

How much does a VRF system cost in Walton-on-Thames?

In Walton-on-Thames, guide prices run from about £2,795 to £5,695 per indoor unit (whole system), plus VAT. A typical job (office floor of 10–16 indoor units) usually comes to £27,995–£91,500 plus VAT. The fixed price follows a free survey.

VRF (variable refrigerant flow) — called VRV by some manufacturers — is a commercial air conditioning system where one outdoor unit, or a bank of them, serves many indoor units through a shared refrigerant network.

Our coverage in Walton-on-Thames

Most commercial premises in and around Walton-on-Thames are shops, offices, salons, pubs and small industrial units. Woking is about 13 km away.

We cover every Walton-on-Thames postcode, including KT12. We also cover Sunbury-on-Thames, West Molesey and Weybridge, all within easy reach of Walton-on-Thames. In Walton-on-Thames, outdoor unit positions are often the deciding factor: a rear flat roof or yard is usually straightforward, while a front elevation may need landlord or planning consent first.

What is included

  • Heat load and diversity calculations for every zone
  • Two-pipe (heat pump) or three-pipe / two-pipe heat recovery system design
  • Leak detection where the refrigerant concentration limits require it
  • Central controls, scheduling and BMS integration
  • Phased installation, pressure testing, commissioning and full F-gas records

VRF / VRV prices in Walton-on-Thames

Prices below include our regional adjustment for the South East (15% above the UK guide).

VRF / VRV guide prices, Walton-on-Thames
ItemGuide price (ex VAT)Inc VATBasis
Heat pump VRF, per indoor unit£2,795–£5,095£3,354–£6,114per unit
Heat recovery VRF, per indoor unit£3,395–£5,695£4,074–£6,834per unit
Central controller and BMS interface£1,095–£4,550£1,314–£5,460per system
Refrigerant leak detection (per alarmed room)£455–£1,050£546–£1,260per room
Crane lift for roof plant£1,095–£3,395£1,314–£4,074per lift

Ex VAT, installed system prices including outdoor plant shared across indoor units.

From enquiry to handover in Walton-on-Thames

  1. Survey and loads

    We calculate loads zone by zone and check roof or plant space, risers and ceiling voids.

  2. System design

    Outdoor units, indoor units, branch boxes and pipe sizes are designed together, including the refrigerant charge and any leak detection.

  3. Phased first fix

    Pipework and controls cabling go in floor by floor, often out of hours in occupied buildings. In Walton-on-Thames we agree timings around your opening hours.

  4. Pressure test and charge

    The network is pressure tested, evacuated and charged with the calculated refrigerant quantity.

  5. Commissioning

    Each indoor unit is commissioned and the controls set up, with as-fitted drawings and F-gas records handed over.

Things to check in Walton-on-Thames

Phasing

In occupied buildings we plan the work floor by floor so the business keeps running.

Roof and height work

Flat roofs, high walls and atriums need the right access equipment and edge protection. We plan towers, MEWPs or scaffold before the job, not on the day.

Plant space

Outdoor units need clear air flow, structural support and safe access for servicing.

Leased premises

If your Walton-on-Thames premises are leased, the landlord's written consent is usually needed for external units, wall penetrations and roof access. We provide drawings and data sheets for the request.

Typical premises in Walton-on-Thames

  • Offices: zoned cooling and heating for open-plan floors, meeting rooms and comms rooms.
  • Hotels and hospitality: quiet bedroom units, public-area cooling and heat recovery for hotels.

Two rules matter for most businesses in England: GB F-gas rules (leak checks from 5 tonnes CO2e) and the periodic energy inspection for more than 12 kW of air conditioning.

Questions about VRF / VRV in Walton-on-Thames

How much does a VRF system cost in Walton-on-Thames?

Guide prices in Walton-on-Thames run from about £2,795 to £5,695 per indoor unit (whole system), plus VAT. A typical job (office floor of 10–16 indoor units) costs £27,995–£91,500 plus VAT. We fix the price in writing after a free survey.

Do you also cover Sunbury-on-Thames, West Molesey and Weybridge?

Yes. Alongside Walton-on-Thames, we also cover Sunbury-on-Thames, West Molesey and Weybridge. Each has its own page with local guide prices.

Which postcodes do you cover in Walton-on-Thames?

All of them, including KT12. Give us your postcode when you enquire and we will confirm the visit details.

Can VRF connect to our BMS?

Yes, through the manufacturer's interface. We specify the right gateway at design stage.

What is heat recovery VRF?

A version that can cool some zones and heat others at the same time, moving heat around the building instead of dumping it outside.

Get a guide price for Walton-on-Thames

Free survey and fixed written quote. We reply with a guide price or to book the survey.

CallGet a quote