VRF and VRV systems in Hampton
Cooling and heating for offices, shops and hospitality venues in Hampton, with a free site survey and a fixed written quote.
- Free site survey and fixed written quote
- Unit sizes, refrigerant and price set out in writing
- Work planned around your opening hours
How much does a VRF system cost in Hampton?
Our guide range in Hampton is £3,150–£6,350 per indoor unit (whole system) before VAT; a typical job (office floor of 10–16 indoor units) is £31,500–£101,995 plus VAT. Your exact price is fixed in writing once we have surveyed.
VRF (variable refrigerant flow) — called VRV by some manufacturers — is a commercial air conditioning system where one outdoor unit, or a bank of them, serves many indoor units through a shared refrigerant network.
Where we work around Hampton
Premises in Hampton are often in mixed-use buildings with shared roofs and tight access, so outdoor unit positions are agreed early.
That includes premises in TW12, WR11 and WV16 and the surrounding districts. We also work in nearby West Molesey, East Molesey and Sunbury-on-Thames. We plan installations in Hampton so the noisy work — core drilling, ceiling access, lifting plant — happens when it disturbs your business least.
What you get
- Two-pipe (heat pump) or three-pipe / two-pipe heat recovery system design
- Refrigerant pipework sizing, branch selectors and refrigerant charge calculation
- Leak detection where the refrigerant concentration limits require it
- Central controls, scheduling and BMS integration
- Phased installation, pressure testing, commissioning and full F-gas records
Prices in Hampton
Guide prices for Hampton, set for London. Your fixed price comes in writing.
| Item | Guide price (ex VAT) | Inc VAT | Basis |
|---|---|---|---|
| Heat pump VRF, per indoor unit | £3,150–£5,695 | £3,780–£6,834 | per unit |
| Heat recovery VRF, per indoor unit | £3,795–£6,350 | £4,554–£7,620 | per unit |
| Central controller and BMS interface | £1,195–£5,050 | £1,434–£6,060 | per system |
| Refrigerant leak detection (per alarmed room) | £505–£1,150 | £606–£1,380 | per room |
| Crane lift for roof plant | £1,195–£3,795 | £1,434–£4,554 | per lift |
Ex VAT, installed system prices including outdoor plant shared across indoor units.
How we work in Hampton
Survey and loads
We calculate loads zone by zone and check roof or plant space, risers and ceiling voids. For sites in Hampton we confirm access and parking beforehand.
System design
Outdoor units, indoor units, branch boxes and pipe sizes are designed together, including the refrigerant charge and any leak detection.
Phased first fix
Pipework and controls cabling go in floor by floor, often out of hours in occupied buildings.
Pressure test and charge
The network is pressure tested, evacuated and charged with the calculated refrigerant quantity.
Commissioning
Each indoor unit is commissioned and the controls set up, with as-fitted drawings and F-gas records handed over.
Points to plan for in Hampton
Plant space
Outdoor units need clear air flow, structural support and safe access for servicing.
Access and parking
Town-centre jobs in Hampton often come down to access — loading restrictions, parking for the van and getting equipment onto a roof. We check this at survey and plan deliveries around it.
Leak checks
Larger VRF systems usually exceed 5 tonnes CO2 equivalent, so they need at least annual F-gas leak checks — more often at 50 tonnes and above.
Shared buildings
In multi-let buildings, roof space, risers and plant areas are often controlled by a managing agent. We work to their permits and method-statement requirements.
Premises we work in around Hampton
- Hotels and hospitality: quiet bedroom units, public-area cooling and heat recovery for hotels.
- Offices: zoned cooling and heating for open-plan floors, meeting rooms and comms rooms.
In England, systems holding 5 tonnes CO2 equivalent of refrigerant or more fall under GB F-gas rules, with regular leak checks and records; buildings with more than 12 kW of air conditioning in total also need a periodic energy inspection.
Your questions answered
How much does a VRF system cost in Hampton?
Guide prices in Hampton run from about £3,150 to £6,350 per indoor unit (whole system), plus VAT. A typical job (office floor of 10–16 indoor units) costs £31,500–£101,995 plus VAT. We fix the price in writing after a free survey.
Do you also cover West Molesey, East Molesey and Sunbury-on-Thames?
Yes. Alongside Hampton, we also cover West Molesey, East Molesey and Sunbury-on-Thames. Each has its own page with local guide prices.
Which postcodes do you cover in Hampton?
All of them, including TW12, WR11 and WV16. Give us your postcode when you enquire and we will confirm the visit details.
What is heat recovery VRF?
A version that can cool some zones and heat others at the same time, moving heat around the building instead of dumping it outside.
Does a VRF system need F-gas leak checks?
Usually yes. Most VRF systems hold enough refrigerant to exceed 5 tonnes CO2 equivalent, which triggers at least annual leak checks and record keeping.
Need VRF and VRV air conditioning in Hampton?
Free survey and fixed written quote. We reply with a guide price or to book the survey.