HVAC design and heat load surveys in Bordon
HVAC design and heat load surveys for businesses in Bordon — surveyed, designed and priced in writing before any work starts.
- Design fees confirmed in writing first
- Equipment, positions and price set out in writing
- Work planned around your opening hours
How much does HVAC design cost in Bordon?
Our guide range in Bordon is £570–£2,795 per project before VAT; a typical job (design package for a 300–800 m² office) is £1,150–£2,795 plus VAT. Your exact price is fixed in writing before any work starts.
An HVAC design and heat load survey works out how much heating and cooling each space needs — from occupancy, equipment, lighting, glazing, orientation and the building fabric — and sets out the system type, unit sizes and positions, pipe and duct routes and controls in a written specification.
Our coverage in Bordon
Bordon is a smaller town in Hampshire, with independent shops, offices, surgeries, pubs and local business units. Basingstoke is about 23 km away.
That includes premises in GU35 and the surrounding districts. We also cover Alton, Farnham and Aldershot, all within easy reach of Bordon. We plan work in Bordon so the noisy parts happen when they disturb your business least.
What the job covers
- Room-by-room heat gain and heat loss calculations
- System options with pros, cons and budget costs
- Layout drawings for units, pipework and condensate
- Electrical load and supply requirements
- Noise data for planning or landlord approval
Guide prices in Bordon
Prices below include our regional adjustment for the South East (15% above the UK guide).
| Item | Guide price (ex VAT) | Inc VAT | Basis |
|---|---|---|---|
| Heat load survey for a single installation | Free | Free | free with a quote |
| Design package, small premises | £570–£1,150 | £684–£1,380 | per project |
| Design package, larger premises | £1,150–£2,795 | £1,380–£3,354 | per project |
| Noise assessment data pack for planning | £340–£1,050 | £408–£1,260 | per project |
Ex VAT. Design fees for larger projects are credited against installation if we carry it out.
How a job in Bordon works
Brief
We agree the use, occupancy, hours and budget. For sites in Bordon we confirm access and parking beforehand.
Survey
We measure the space and record fabric, glazing and services.
Calculate and design
Loads are calculated and a system designed.
Specify
You receive drawings and a specification.
Points to plan for in Bordon
Noise
Outdoor unit noise is designed in from the start, not fixed afterwards.
Neighbours and noise
Outdoor units near flats — common above shops — need careful siting so noise at neighbours' windows stays low. We choose positions and quieter units with that in mind.
Coordination
Ceiling, lighting, sprinkler and electrical layouts are coordinated early.
Leased premises
If your Bordon premises are leased, the landlord's written consent is usually needed for external units, wall penetrations and roof access. We provide drawings and data sheets for the request.
Who we work with in Bordon
- Hotels and hospitality: quiet bedroom units, public-area cooling and heat recovery for hotels.
- Pubs and bars: cooling for busy bars, function rooms and cellars, sited with neighbours in mind.
- Gyms and leisure: high-capacity cooling and fresh air for gym floors, studios and changing rooms.
- Schools and education: classroom cooling, ventilation and IT room cooling, installed in the holidays.
Compliance in England: refrigerant work falls under GB F-gas rules, and buildings with more than 12 kW of air conditioning in total need a periodic energy inspection (often called TM44).
FAQs for Bordon
How much does HVAC design cost in Bordon?
Guide prices in Bordon run from about £570 to £2,795 per project, plus VAT. A typical job (design package for a 300–800 m² office) costs £1,150–£2,795 plus VAT. We confirm the price in writing before work starts.
Do you also cover Alton, Farnham and Aldershot?
Yes. Alongside Bordon, we also cover Alton, Farnham and Aldershot. Each has its own page with local guide prices.
Which postcodes do you cover in Bordon?
All of them, including GU35. Give us your postcode when you enquire and we will confirm the visit details.
Do you provide noise data for planning?
Yes. We can supply manufacturer noise data and calculations to support a planning application.
Why do I need a heat load calculation?
It sizes the system to what the room actually needs, avoiding oversized equipment that wastes money and undersized equipment that cannot cope.
Need HVAC design and heat load surveys in Bordon?
Heat loads for single installations are free with a quote; design fees are confirmed before work starts.