VRF and VRV systems in Berkshire
Cooling and heating for offices, shops and hospitality venues in Berkshire, with a free site survey and a fixed written quote.
- Free site survey and fixed written quote
- Unit sizes, refrigerant and price set out in writing
- Work planned around your opening hours
How much does a VRF system cost in Berkshire?
Budget roughly £2,795–£5,695 per indoor unit (whole system) ex VAT in Berkshire. For a typical job — office floor of 10–16 indoor units — expect £27,995–£91,500 plus VAT. The fixed price follows a free survey.
VRF (variable refrigerant flow) — called VRV by some manufacturers — is a commercial air conditioning system where one outdoor unit, or a bank of them, serves many indoor units through a shared refrigerant network.
Our coverage in Berkshire
We cover all of Berkshire, including Reading, Slough, Bracknell, Maidenhead and Wokingham. Wherever your premises are, the survey, quote and installation follow the same steps.
Postcode districts we cover include GU47, RG2, RG8, RG14, RG30, RG42, SL5 and TW19. Buildings across Berkshire range from converted period offices to modern units with deep ceiling voids, so we measure each site rather than relying on a standard package.
What is included
- Heat load and diversity calculations for every zone
- Two-pipe (heat pump) or three-pipe / two-pipe heat recovery system design
- Refrigerant pipework sizing, branch selectors and refrigerant charge calculation
- Leak detection where the refrigerant concentration limits require it
- Central controls, scheduling and BMS integration
VRF / VRV prices in Berkshire
Guide prices for Berkshire, set for the South East. Your fixed price comes in writing.
| Item | Guide price (ex VAT) | Inc VAT | Basis |
|---|---|---|---|
| Heat pump VRF, per indoor unit | £2,795–£5,095 | £3,354–£6,114 | per unit |
| Heat recovery VRF, per indoor unit | £3,395–£5,695 | £4,074–£6,834 | per unit |
| Central controller and BMS interface | £1,095–£4,550 | £1,314–£5,460 | per system |
| Refrigerant leak detection (per alarmed room) | £455–£1,050 | £546–£1,260 | per room |
| Crane lift for roof plant | £1,095–£3,395 | £1,314–£4,074 | per lift |
Ex VAT, installed system prices including outdoor plant shared across indoor units.
The steps for a project in Berkshire
Survey and loads
We calculate loads zone by zone and check roof or plant space, risers and ceiling voids.
System design
Outdoor units, indoor units, branch boxes and pipe sizes are designed together, including the refrigerant charge and any leak detection.
Phased first fix
Pipework and controls cabling go in floor by floor, often out of hours in occupied buildings. We keep work areas in Berkshire screened and tidy at the end of each day.
Pressure test and charge
The network is pressure tested, evacuated and charged with the calculated refrigerant quantity.
Commissioning
Each indoor unit is commissioned and the controls set up, with as-fitted drawings and F-gas records handed over.
What to think about in Berkshire
Leak checks
Larger VRF systems usually exceed 5 tonnes CO2 equivalent, so they need at least annual F-gas leak checks — more often at 50 tonnes and above.
Shared buildings
In multi-let buildings, roof space, risers and plant areas are often controlled by a managing agent. We work to their permits and method-statement requirements.
Refrigerant in occupied rooms
Because one network carries a large refrigerant charge, small rooms on the system are checked against the safety limits in BS EN 378 and may need leak detection.
Neighbours and noise
Outdoor units near flats — common above shops — need careful siting so noise at neighbours' windows stays low. We choose positions and quieter units with that in mind.
Premises we work in around Berkshire
- Hotels and hospitality: quiet bedroom units, public-area cooling and heat recovery for hotels.
- Offices: zoned cooling and heating for open-plan floors, meeting rooms and comms rooms.
Compliance in England: refrigerant work falls under GB F-gas rules, and buildings with more than 12 kW of air conditioning in total need a periodic energy inspection (often called TM44).
FAQs for Berkshire
How much does a VRF system cost in Berkshire?
Guide prices in Berkshire run from about £2,795 to £5,695 per indoor unit (whole system), plus VAT. A typical job (office floor of 10–16 indoor units) costs £27,995–£91,500 plus VAT. We fix the price in writing after a free survey.
Do you also cover Surrey, Buckinghamshire and London?
Yes. Alongside Berkshire, we also cover Surrey, Buckinghamshire and London. Each has its own page with local guide prices.
When is VRF better than separate split systems?
Usually once you need more than about six to eight indoor units, want central control, or are short of space for outdoor units. One outdoor unit can replace many.
What is heat recovery VRF?
A version that can cool some zones and heat others at the same time, moving heat around the building instead of dumping it outside.
Get a guide price for Berkshire
Free survey and fixed written quote. We reply with a guide price or to book the survey.