VRF and VRV systems in Didcot
Cooling and heating for offices, shops and hospitality venues in Didcot, with a free site survey and a fixed written quote.
- Free site survey and fixed written quote
- Unit sizes, refrigerant and price set out in writing
- Work planned around your opening hours
How much does a VRF system cost in Didcot?
Our guide range in Didcot is £2,795–£5,695 per indoor unit (whole system) before VAT; a typical job (office floor of 10–16 indoor units) is £27,995–£91,500 plus VAT. You get a fixed written quote after the free survey.
VRF (variable refrigerant flow) — called VRV by some manufacturers — is a commercial air conditioning system where one outdoor unit, or a bank of them, serves many indoor units through a shared refrigerant network.
Our coverage in Didcot
In Didcot, typical premises are high-street shops, offices above them, surgeries, salons and local industrial units. Oxford is about 16 km away.
We work across Didcot's postcode districts, including OX11. Nearby, we also cover Abingdon (about 7 km), Oxford (about 16 km) and Thatcham (about 23 km). In Didcot we work with offices, shops and hospitality premises, from a single room to a whole floor; each job starts with a heat load check rather than a guess from the floor area.
What the job covers
- Heat load and diversity calculations for every zone
- Two-pipe (heat pump) or three-pipe / two-pipe heat recovery system design
- Refrigerant pipework sizing, branch selectors and refrigerant charge calculation
- Central controls, scheduling and BMS integration
- Phased installation, pressure testing, commissioning and full F-gas records
Prices in Didcot
Guide prices for Didcot, set for the South East. Your fixed price comes in writing.
| Item | Guide price (ex VAT) | Inc VAT | Basis |
|---|---|---|---|
| Heat pump VRF, per indoor unit | £2,795–£5,095 | £3,354–£6,114 | per unit |
| Heat recovery VRF, per indoor unit | £3,395–£5,695 | £4,074–£6,834 | per unit |
| Central controller and BMS interface | £1,095–£4,550 | £1,314–£5,460 | per system |
| Refrigerant leak detection (per alarmed room) | £455–£1,050 | £546–£1,260 | per room |
| Crane lift for roof plant | £1,095–£3,395 | £1,314–£4,074 | per lift |
Ex VAT, installed system prices including outdoor plant shared across indoor units.
From enquiry to handover in Didcot
Survey and loads
We calculate loads zone by zone and check roof or plant space, risers and ceiling voids. For sites in Didcot we confirm access and parking beforehand.
System design
Outdoor units, indoor units, branch boxes and pipe sizes are designed together, including the refrigerant charge and any leak detection.
Phased first fix
Pipework and controls cabling go in floor by floor, often out of hours in occupied buildings.
Pressure test and charge
The network is pressure tested, evacuated and charged with the calculated refrigerant quantity.
Commissioning
Each indoor unit is commissioned and the controls set up, with as-fitted drawings and F-gas records handed over.
Local points to consider
Phasing
In occupied buildings we plan the work floor by floor so the business keeps running.
Shared buildings
In multi-let buildings, roof space, risers and plant areas are often controlled by a managing agent. We work to their permits and method-statement requirements.
Refrigerant in occupied rooms
Because one network carries a large refrigerant charge, small rooms on the system are checked against the safety limits in BS EN 378 and may need leak detection.
Access and parking
Town-centre jobs in Didcot often come down to access — loading restrictions, parking for the van and getting equipment onto a roof. We check this at survey and plan deliveries around it.
Types of premises we cover in Didcot
- Hotels and hospitality: quiet bedroom units, public-area cooling and heat recovery for hotels.
- Offices: zoned cooling and heating for open-plan floors, meeting rooms and comms rooms.
In England, systems holding 5 tonnes CO2 equivalent of refrigerant or more fall under GB F-gas rules, with regular leak checks and records; buildings with more than 12 kW of air conditioning in total also need a periodic energy inspection.
Questions about VRF / VRV in Didcot
How much does a VRF system cost in Didcot?
Guide prices in Didcot run from about £2,795 to £5,695 per indoor unit (whole system), plus VAT. A typical job (office floor of 10–16 indoor units) costs £27,995–£91,500 plus VAT. We fix the price in writing after a free survey.
Do you also cover Abingdon, Oxford and Thatcham?
Yes. Alongside Didcot, we also cover Abingdon, Oxford and Thatcham. Each has its own page with local guide prices.
Which postcodes do you cover in Didcot?
All of them, including OX11. Give us your postcode when you enquire and we will confirm the visit details.
What is heat recovery VRF?
A version that can cool some zones and heat others at the same time, moving heat around the building instead of dumping it outside.
Can VRF connect to our BMS?
Yes, through the manufacturer's interface. We specify the right gateway at design stage.
Get a guide price for Didcot
Free survey and fixed written quote. We reply with a guide price or to book the survey.