VRF and VRV systems in Oxford
VRF and VRV air conditioning for businesses in Oxford — surveyed, designed and priced in writing before any work starts.
- Free site survey and fixed written quote
- Unit sizes, refrigerant and price set out in writing
- Work planned around your opening hours
How much does a VRF system cost in Oxford?
Our guide range in Oxford is £2,795–£5,695 per indoor unit (whole system) before VAT; a typical job (office floor of 10–16 indoor units) is £27,995–£91,500 plus VAT. The fixed price follows a free survey.
VRF (variable refrigerant flow) — called VRV by some manufacturers — is a commercial air conditioning system where one outdoor unit, or a bank of them, serves many indoor units through a shared refrigerant network.
Working in Oxford
Oxford is one of the main commercial centres in Oxfordshire, with city-centre offices, retail streets, hospitality venues and business parks on its edges.
Postcode districts we cover in Oxford include OX1. We also work in nearby Abingdon, Didcot and Witney. We plan installations in Oxford so the noisy work — core drilling, ceiling access, lifting plant — happens when it disturbs your business least.
Included as standard
- Heat load and diversity calculations for every zone
- Two-pipe (heat pump) or three-pipe / two-pipe heat recovery system design
- Refrigerant pipework sizing, branch selectors and refrigerant charge calculation
- Central controls, scheduling and BMS integration
- Phased installation, pressure testing, commissioning and full F-gas records
Local guide prices for Oxford
Guide prices for Oxford, set for the South East. Your fixed price comes in writing.
| Item | Guide price (ex VAT) | Inc VAT | Basis |
|---|---|---|---|
| Heat pump VRF, per indoor unit | £2,795–£5,095 | £3,354–£6,114 | per unit |
| Heat recovery VRF, per indoor unit | £3,395–£5,695 | £4,074–£6,834 | per unit |
| Central controller and BMS interface | £1,095–£4,550 | £1,314–£5,460 | per system |
| Refrigerant leak detection (per alarmed room) | £455–£1,050 | £546–£1,260 | per room |
| Crane lift for roof plant | £1,095–£3,395 | £1,314–£4,074 | per lift |
Ex VAT, installed system prices including outdoor plant shared across indoor units.
How a job in Oxford works
Survey and loads
We calculate loads zone by zone and check roof or plant space, risers and ceiling voids. For sites in Oxford we confirm access and parking beforehand.
System design
Outdoor units, indoor units, branch boxes and pipe sizes are designed together, including the refrigerant charge and any leak detection.
Phased first fix
Pipework and controls cabling go in floor by floor, often out of hours in occupied buildings.
Pressure test and charge
The network is pressure tested, evacuated and charged with the calculated refrigerant quantity.
Commissioning
Each indoor unit is commissioned and the controls set up, with as-fitted drawings and F-gas records handed over.
Local points to consider
Refrigerant in occupied rooms
Because one network carries a large refrigerant charge, small rooms on the system are checked against the safety limits in BS EN 378 and may need leak detection.
Neighbours and noise
Outdoor units near flats — common above shops — need careful siting so noise at neighbours' windows stays low. We choose positions and quieter units with that in mind.
Phasing
In occupied buildings we plan the work floor by floor so the business keeps running.
Shared buildings
In multi-let buildings, roof space, risers and plant areas are often controlled by a managing agent. We work to their permits and method-statement requirements.
Who we work with in Oxford
- Hotels and hospitality: quiet bedroom units, public-area cooling and heat recovery for hotels.
- Offices: zoned cooling and heating for open-plan floors, meeting rooms and comms rooms.
Two rules matter for most businesses in England: GB F-gas rules (leak checks from 5 tonnes CO2e) and the periodic energy inspection for more than 12 kW of air conditioning.
Questions about VRF / VRV in Oxford
How much does a VRF system cost in Oxford?
Guide prices in Oxford run from about £2,795 to £5,695 per indoor unit (whole system), plus VAT. A typical job (office floor of 10–16 indoor units) costs £27,995–£91,500 plus VAT. We fix the price in writing after a free survey.
Do you also cover Abingdon, Didcot and Witney?
Yes. Alongside Oxford, we also cover Abingdon, Didcot and Witney. Each has its own page with local guide prices.
Which postcodes do you cover in Oxford?
All of them, including OX1. Give us your postcode when you enquire and we will confirm the visit details.
How long does a VRF system last?
With regular servicing, commercial VRF equipment commonly runs for 15 years or more. Lifespan depends on use, maintenance and the operating environment.
When is VRF better than separate split systems?
Usually once you need more than about six to eight indoor units, want central control, or are short of space for outdoor units. One outdoor unit can replace many.
Talk to us about your premises in Oxford
Free survey and fixed written quote. We reply with a guide price or to book the survey.