0800 088 6248
Bank of VRF outdoor units on a steel platform with insulated refrigerant pipework

VRF and VRV systems in Hampshire

A free survey, a clear specification and a fixed price for VRF and VRV air conditioning in Hampshire.

  • Free site survey and fixed written quote
  • Unit sizes, refrigerant and price set out in writing
  • Work planned around your opening hours

How much does a VRF system cost in Hampshire?

In Hampshire, guide prices run from about £2,795 to £5,695 per indoor unit (whole system), plus VAT. A typical job (office floor of 10–16 indoor units) usually comes to £27,995–£91,500 plus VAT. Your exact price is fixed in writing once we have surveyed.

VRF (variable refrigerant flow) — called VRV by some manufacturers — is a commercial air conditioning system where one outdoor unit, or a bank of them, serves many indoor units through a shared refrigerant network.

Working in Hampshire

We cover all of Hampshire, including Southampton, Portsmouth, Basingstoke, Gosport and Waterlooville. Wherever your premises are, the survey, quote and installation follow the same steps.

Postcode districts we cover include BH23, GU32, PO4, PO15, RG26, SO21, SO42 and SP11. In Hampshire, outdoor unit positions are often the deciding factor: a rear flat roof or yard is usually straightforward, while a front elevation may need landlord or planning consent first.

What is included

  • Heat load and diversity calculations for every zone
  • Two-pipe (heat pump) or three-pipe / two-pipe heat recovery system design
  • Refrigerant pipework sizing, branch selectors and refrigerant charge calculation
  • Leak detection where the refrigerant concentration limits require it
  • Phased installation, pressure testing, commissioning and full F-gas records

Prices in Hampshire

These guide prices are adjusted for the South East, where labour and access costs run about 15% above the UK guide.

VRF / VRV guide prices, Hampshire
ItemGuide price (ex VAT)Inc VATBasis
Heat pump VRF, per indoor unit£2,795–£5,095£3,354–£6,114per unit
Heat recovery VRF, per indoor unit£3,395–£5,695£4,074–£6,834per unit
Central controller and BMS interface£1,095–£4,550£1,314–£5,460per system
Refrigerant leak detection (per alarmed room)£455–£1,050£546–£1,260per room
Crane lift for roof plant£1,095–£3,395£1,314–£4,074per lift

Ex VAT, installed system prices including outdoor plant shared across indoor units.

How we work in Hampshire

  1. Survey and loads

    We calculate loads zone by zone and check roof or plant space, risers and ceiling voids.

  2. System design

    Outdoor units, indoor units, branch boxes and pipe sizes are designed together, including the refrigerant charge and any leak detection.

  3. Phased first fix

    Pipework and controls cabling go in floor by floor, often out of hours in occupied buildings. In Hampshire we agree timings around your opening hours.

  4. Pressure test and charge

    The network is pressure tested, evacuated and charged with the calculated refrigerant quantity.

  5. Commissioning

    Each indoor unit is commissioned and the controls set up, with as-fitted drawings and F-gas records handed over.

Points to plan for in Hampshire

Phasing

In occupied buildings we plan the work floor by floor so the business keeps running.

Leased premises

If your Hampshire premises are leased, the landlord's written consent is usually needed for external units, wall penetrations and roof access. We provide drawings and data sheets for the request.

Refrigerant in occupied rooms

Because one network carries a large refrigerant charge, small rooms on the system are checked against the safety limits in BS EN 378 and may need leak detection.

Shared buildings

In multi-let buildings, roof space, risers and plant areas are often controlled by a managing agent. We work to their permits and method-statement requirements.

Types of premises we cover in Hampshire

  • Hotels and hospitality: quiet bedroom units, public-area cooling and heat recovery for hotels.
  • Offices: zoned cooling and heating for open-plan floors, meeting rooms and comms rooms.

Compliance in England: refrigerant work falls under GB F-gas rules, and buildings with more than 12 kW of air conditioning in total need a periodic energy inspection (often called TM44).

Questions about VRF / VRV in Hampshire

How much does a VRF system cost in Hampshire?

Guide prices in Hampshire run from about £2,795 to £5,695 per indoor unit (whole system), plus VAT. A typical job (office floor of 10–16 indoor units) costs £27,995–£91,500 plus VAT. We fix the price in writing after a free survey.

Do you also cover the Isle of Wight, Berkshire and West Sussex?

Yes. Alongside Hampshire, we also cover the Isle of Wight, Berkshire and West Sussex. Each has its own page with local guide prices.

Can VRF connect to our BMS?

Yes, through the manufacturer's interface. We specify the right gateway at design stage.

Does a VRF system need F-gas leak checks?

Usually yes. Most VRF systems hold enough refrigerant to exceed 5 tonnes CO2 equivalent, which triggers at least annual leak checks and record keeping.

Need VRF and VRV air conditioning in Hampshire?

Free survey and fixed written quote. We reply with a guide price or to book the survey.

CallGet a quote