0800 088 6248
Bank of VRF outdoor units on a steel platform with insulated refrigerant pipework

VRF and VRV systems in Fulham

VRF and VRV air conditioning in Fulham, sized to the real heat load of your premises rather than guessed from the floor area.

  • Free site survey and fixed written quote
  • Unit sizes, refrigerant and price set out in writing
  • Work planned around your opening hours

How much does a VRF system cost in Fulham?

Our guide range in Fulham is £3,150–£6,350 per indoor unit (whole system) before VAT; a typical job (office floor of 10–16 indoor units) is £31,500–£101,995 plus VAT. You get a fixed written quote after the free survey.

VRF (variable refrigerant flow) — called VRV by some manufacturers — is a commercial air conditioning system where one outdoor unit, or a bank of them, serves many indoor units through a shared refrigerant network.

Covering Fulham and nearby

Fulham sits within London's dense commercial fabric: shopfronts, offices above, studios and venues, where outdoor unit positions and access need careful planning.

That includes premises in SW6 and the surrounding districts. We also cover Chelsea, Putney and Battersea, all within easy reach of Fulham. For VRF and VRV air conditioning in Fulham, the survey looks at where the outdoor unit can go, how pipework will reach the indoor units and whether the electrical supply has capacity.

Included as standard

  • Heat load and diversity calculations for every zone
  • Two-pipe (heat pump) or three-pipe / two-pipe heat recovery system design
  • Refrigerant pipework sizing, branch selectors and refrigerant charge calculation
  • Leak detection where the refrigerant concentration limits require it
  • Central controls, scheduling and BMS integration

VRF / VRV prices in Fulham

Prices below include our regional adjustment for London (28% above the UK guide).

VRF / VRV guide prices, Fulham
ItemGuide price (ex VAT)Inc VATBasis
Heat pump VRF, per indoor unit£3,150–£5,695£3,780–£6,834per unit
Heat recovery VRF, per indoor unit£3,795–£6,350£4,554–£7,620per unit
Central controller and BMS interface£1,195–£5,050£1,434–£6,060per system
Refrigerant leak detection (per alarmed room)£505–£1,150£606–£1,380per room
Crane lift for roof plant£1,195–£3,795£1,434–£4,554per lift

Ex VAT, installed system prices including outdoor plant shared across indoor units.

How a job in Fulham works

  1. Survey and loads

    We calculate loads zone by zone and check roof or plant space, risers and ceiling voids.

  2. System design

    Outdoor units, indoor units, branch boxes and pipe sizes are designed together, including the refrigerant charge and any leak detection.

  3. Phased first fix

    Pipework and controls cabling go in floor by floor, often out of hours in occupied buildings. In Fulham we agree timings around your opening hours.

  4. Pressure test and charge

    The network is pressure tested, evacuated and charged with the calculated refrigerant quantity.

  5. Commissioning

    Each indoor unit is commissioned and the controls set up, with as-fitted drawings and F-gas records handed over.

Things to check in Fulham

Plant space

Outdoor units need clear air flow, structural support and safe access for servicing.

Neighbours and noise

Outdoor units near flats — common above shops — need careful siting so noise at neighbours' windows stays low. We choose positions and quieter units with that in mind.

Leak checks

Larger VRF systems usually exceed 5 tonnes CO2 equivalent, so they need at least annual F-gas leak checks — more often at 50 tonnes and above.

Working hours

Most Fulham businesses prefer noisy work outside trading hours. Early starts, evenings and weekends can be arranged and are priced up front.

Types of premises we cover in Fulham

  • Offices: zoned cooling and heating for open-plan floors, meeting rooms and comms rooms.
  • Hotels and hospitality: quiet bedroom units, public-area cooling and heat recovery for hotels.

In England, systems holding 5 tonnes CO2 equivalent of refrigerant or more fall under GB F-gas rules, with regular leak checks and records; buildings with more than 12 kW of air conditioning in total also need a periodic energy inspection.

Your questions answered

How much does a VRF system cost in Fulham?

Guide prices in Fulham run from about £3,150 to £6,350 per indoor unit (whole system), plus VAT. A typical job (office floor of 10–16 indoor units) costs £31,500–£101,995 plus VAT. We fix the price in writing after a free survey.

Do you also cover Chelsea, Putney and Battersea?

Yes. Alongside Fulham, we also cover Chelsea, Putney and Battersea. Each has its own page with local guide prices.

Which postcodes do you cover in Fulham?

All of them, including SW6. Give us your postcode when you enquire and we will confirm the visit details.

When is VRF better than separate split systems?

Usually once you need more than about six to eight indoor units, want central control, or are short of space for outdoor units. One outdoor unit can replace many.

Can VRF connect to our BMS?

Yes, through the manufacturer's interface. We specify the right gateway at design stage.

Need VRF and VRV air conditioning in Fulham?

Free survey and fixed written quote. We reply with a guide price or to book the survey.

CallGet a quote