0800 088 6248
Bank of VRF outdoor units on a steel platform with insulated refrigerant pipework

VRF and VRV systems in Putney

From a single room to a whole floor: VRF and VRV air conditioning in Putney, planned around your trading hours.

  • Free site survey and fixed written quote
  • Unit sizes, refrigerant and price set out in writing
  • Work planned around your opening hours

How much does a VRF system cost in Putney?

In Putney, guide prices run from about £3,150 to £6,350 per indoor unit (whole system), plus VAT. A typical job (office floor of 10–16 indoor units) usually comes to £31,500–£101,995 plus VAT. The fixed price follows a free survey.

VRF (variable refrigerant flow) — called VRV by some manufacturers — is a commercial air conditioning system where one outdoor unit, or a bank of them, serves many indoor units through a shared refrigerant network.

Covering Putney and nearby

In Putney, commercial premises range from street-level shops and restaurants to offices in converted and modern buildings, many with managing agents and landlord consents to work through.

We cover every Putney postcode, including SW15. We also cover Barnes, Fulham and Wimbledon, all within easy reach of Putney. In Putney we work with offices, shops and hospitality premises, from a single room to a whole floor; each job starts with a heat load check rather than a guess from the floor area.

What we do

  • Heat load and diversity calculations for every zone
  • Refrigerant pipework sizing, branch selectors and refrigerant charge calculation
  • Leak detection where the refrigerant concentration limits require it
  • Central controls, scheduling and BMS integration
  • Phased installation, pressure testing, commissioning and full F-gas records

Prices in Putney

Prices below include our regional adjustment for London (28% above the UK guide).

VRF / VRV guide prices, Putney
ItemGuide price (ex VAT)Inc VATBasis
Heat pump VRF, per indoor unit£3,150–£5,695£3,780–£6,834per unit
Heat recovery VRF, per indoor unit£3,795–£6,350£4,554–£7,620per unit
Central controller and BMS interface£1,195–£5,050£1,434–£6,060per system
Refrigerant leak detection (per alarmed room)£505–£1,150£606–£1,380per room
Crane lift for roof plant£1,195–£3,795£1,434–£4,554per lift

Ex VAT, installed system prices including outdoor plant shared across indoor units.

How it works in Putney

  1. Survey and loads

    We calculate loads zone by zone and check roof or plant space, risers and ceiling voids. For sites in Putney we confirm access and parking beforehand.

  2. System design

    Outdoor units, indoor units, branch boxes and pipe sizes are designed together, including the refrigerant charge and any leak detection.

  3. Phased first fix

    Pipework and controls cabling go in floor by floor, often out of hours in occupied buildings.

  4. Pressure test and charge

    The network is pressure tested, evacuated and charged with the calculated refrigerant quantity.

  5. Commissioning

    Each indoor unit is commissioned and the controls set up, with as-fitted drawings and F-gas records handed over.

Local points to consider

Refrigerant in occupied rooms

Because one network carries a large refrigerant charge, small rooms on the system are checked against the safety limits in BS EN 378 and may need leak detection.

Roof and height work

Flat roofs, high walls and atriums need the right access equipment and edge protection. We plan towers, MEWPs or scaffold before the job, not on the day.

Leak checks

Larger VRF systems usually exceed 5 tonnes CO2 equivalent, so they need at least annual F-gas leak checks — more often at 50 tonnes and above.

Conservation areas

Historic streets and listed buildings in and around Putney are more likely to need planning permission for outdoor units on visible elevations. We check with the local planning authority before work is booked.

Typical premises in Putney

  • Hotels and hospitality: quiet bedroom units, public-area cooling and heat recovery for hotels.
  • Offices: zoned cooling and heating for open-plan floors, meeting rooms and comms rooms.

Compliance in England: refrigerant work falls under GB F-gas rules, and buildings with more than 12 kW of air conditioning in total need a periodic energy inspection (often called TM44).

FAQs for Putney

How much does a VRF system cost in Putney?

Guide prices in Putney run from about £3,150 to £6,350 per indoor unit (whole system), plus VAT. A typical job (office floor of 10–16 indoor units) costs £31,500–£101,995 plus VAT. We fix the price in writing after a free survey.

Do you also cover Barnes, Fulham and Wimbledon?

Yes. Alongside Putney, we also cover Barnes, Fulham and Wimbledon. Each has its own page with local guide prices.

Which postcodes do you cover in Putney?

All of them, including SW15. Give us your postcode when you enquire and we will confirm the visit details.

Does a VRF system need F-gas leak checks?

Usually yes. Most VRF systems hold enough refrigerant to exceed 5 tonnes CO2 equivalent, which triggers at least annual leak checks and record keeping.

What is heat recovery VRF?

A version that can cool some zones and heat others at the same time, moving heat around the building instead of dumping it outside.

Need VRF and VRV air conditioning in Putney?

Free survey and fixed written quote. We reply with a guide price or to book the survey.

CallGet a quote