0800 088 6248
Bank of VRF outdoor units on a steel platform with insulated refrigerant pipework

VRF and VRV systems in Feltham

VRF and VRV air conditioning for businesses in Feltham — surveyed, designed and priced in writing before any work starts.

  • Free site survey and fixed written quote
  • Unit sizes, refrigerant and price set out in writing
  • Work planned around your opening hours

How much does a VRF system cost in Feltham?

In Feltham, guide prices run from about £3,150 to £6,350 per indoor unit (whole system), plus VAT. A typical job (office floor of 10–16 indoor units) usually comes to £31,500–£101,995 plus VAT. The fixed price follows a free survey.

VRF (variable refrigerant flow) — called VRV by some manufacturers — is a commercial air conditioning system where one outdoor unit, or a bank of them, serves many indoor units through a shared refrigerant network.

Working in Feltham

Premises in Feltham are often in mixed-use buildings with shared roofs and tight access, so outdoor unit positions are agreed early.

We work across Feltham's postcode districts, including TW13. Nearby, we also cover Ashford, Surrey (about 3 km), Hounslow (about 4 km) and Sunbury-on-Thames (about 5 km). In Feltham we work with offices, shops and hospitality premises, from a single room to a whole floor; each job starts with a heat load check rather than a guess from the floor area.

Included as standard

  • Heat load and diversity calculations for every zone
  • Two-pipe (heat pump) or three-pipe / two-pipe heat recovery system design
  • Leak detection where the refrigerant concentration limits require it
  • Central controls, scheduling and BMS integration
  • Phased installation, pressure testing, commissioning and full F-gas records

VRF / VRV prices in Feltham

Prices below include our regional adjustment for London (28% above the UK guide).

VRF / VRV guide prices, Feltham
ItemGuide price (ex VAT)Inc VATBasis
Heat pump VRF, per indoor unit£3,150–£5,695£3,780–£6,834per unit
Heat recovery VRF, per indoor unit£3,795–£6,350£4,554–£7,620per unit
Central controller and BMS interface£1,195–£5,050£1,434–£6,060per system
Refrigerant leak detection (per alarmed room)£505–£1,150£606–£1,380per room
Crane lift for roof plant£1,195–£3,795£1,434–£4,554per lift

Ex VAT, installed system prices including outdoor plant shared across indoor units.

The steps for a project in Feltham

  1. Survey and loads

    We calculate loads zone by zone and check roof or plant space, risers and ceiling voids.

  2. System design

    Outdoor units, indoor units, branch boxes and pipe sizes are designed together, including the refrigerant charge and any leak detection.

  3. Phased first fix

    Pipework and controls cabling go in floor by floor, often out of hours in occupied buildings. We keep work areas in Feltham screened and tidy at the end of each day.

  4. Pressure test and charge

    The network is pressure tested, evacuated and charged with the calculated refrigerant quantity.

  5. Commissioning

    Each indoor unit is commissioned and the controls set up, with as-fitted drawings and F-gas records handed over.

Things to check in Feltham

Plant space

Outdoor units need clear air flow, structural support and safe access for servicing.

Working hours

Most Feltham businesses prefer noisy work outside trading hours. Early starts, evenings and weekends can be arranged and are priced up front.

Phasing

In occupied buildings we plan the work floor by floor so the business keeps running.

Access and parking

Town-centre jobs in Feltham often come down to access — loading restrictions, parking for the van and getting equipment onto a roof. We check this at survey and plan deliveries around it.

Typical premises in Feltham

  • Offices: zoned cooling and heating for open-plan floors, meeting rooms and comms rooms.
  • Hotels and hospitality: quiet bedroom units, public-area cooling and heat recovery for hotels.

In England, systems holding 5 tonnes CO2 equivalent of refrigerant or more fall under GB F-gas rules, with regular leak checks and records; buildings with more than 12 kW of air conditioning in total also need a periodic energy inspection.

FAQs for Feltham

How much does a VRF system cost in Feltham?

Guide prices in Feltham run from about £3,150 to £6,350 per indoor unit (whole system), plus VAT. A typical job (office floor of 10–16 indoor units) costs £31,500–£101,995 plus VAT. We fix the price in writing after a free survey.

Do you also cover Ashford, Surrey, Hounslow and Sunbury-on-Thames?

Yes. Alongside Feltham, we also cover Ashford, Surrey, Hounslow and Sunbury-on-Thames. Each has its own page with local guide prices.

Which postcodes do you cover in Feltham?

All of them, including TW13. Give us your postcode when you enquire and we will confirm the visit details.

What is heat recovery VRF?

A version that can cool some zones and heat others at the same time, moving heat around the building instead of dumping it outside.

Can VRF connect to our BMS?

Yes, through the manufacturer's interface. We specify the right gateway at design stage.

Get a guide price for Feltham

Free survey and fixed written quote. We reply with a guide price or to book the survey.

CallGet a quote